Vinyl Tubing (all sold per foot)

• 1/2" black vinyl tubing, $0.39
• 1/2" blue transparent vinyl tubing, $0.39
• 3/16" black vinyl tubing, $0.39
• 1/4" black vinyl tubing, $0.39

Irrigation Fittings

• 1/4" barbed T, $0.39
• 1/4" barbed Elbow, $0.39
• 1/4" barbed Straight, $0.39
• 1/4" barbed Cross (4-way connector), $0.39
• 1/2" barbed T, $0.79
• 1/2" barbed Elbow, $0.79
• 1/2" barbed Straight, $0.79

Plumbing for Hydroponic Systems

• 1/2" Grommet, $0.99
• Snap Clamp For 1/2" Vinyl Tubing, $0.99
• 1" Snap Clamp, $0.99
• Aqua Turret Water Emitter, $0.69
• Basket Stake Dripper, $0.35
• Aeroponic 360 Degree Micro Sprayer, $0.50
• 1/4" Shut Off Valve, $2.99
• 1/2" Shut Off Valve, $2.99
• 1/2" Bulk Head Union, $2.99
• 1/2" Female Hose End, $2.50
• Float Valve, $9.99
• Ebb and Flow Inflow Fitting, $0.99
• Ebb and Flow Overflow Tube and Cap Fitting, $1.99

SPECIAL: Ebb & Flow Fittings Kit, with 2 bulk head unions, 2 female hose ends, ebb and flow inflow and overflow fittings set, tubing snap clamp, and fill and drain tubing.

• Ebb & Flow Fittings Kit, $13.99
• Botanicare Bulk Head Kit With Two Screens, $6.30
• 1/2" Botanicare Bulk Head Fitting, $1.80
• 3/4" Botanicare Bulk Head Fitting, $2.00
• Botanicare Bulk Head Extension, $0.65
• Botanicare Bulk Head Screen, $0.65
• Botanicare Bulk Head Washer, $0.65

Water Distributors

Water distributors are made of hard 1/2" tubing. Place open end on 1/2" water pump outlet; the other end is capped. Brass grommets mark each hole. Use 3/16" tubing as the water line. Additional holes are available...add $1.00 for each pair of additional holes.

• 4-line Water Distributor, $7.99
• 6-line Water Distributor, $8.99
• 8-line Water Distributor, $9.99
• 10-line Water Distributor, $10.99
• 12-line Water Distributor, $11.99

CO2 Enrichment Tubing

• Laser Drilled Tubing For CO2 Regulators (20ft), $12.95